Xtraseal Clear Epoxy Adhesive 4-Min - 2 x 17ml

Please note that this product is sold and shipped by one of our trusted Marketplace Sellers. This product is not available in any of our physical stores.

4 MINUTES Clear EPOXY is a fast-setting epoxy adhesive. It offers good gap-filling capabilities and slumping characteristics. It has temperatures resistance up to 120oC and is pressure resistant. It is very useful for emergency repairs in industries, workshops, marine, automotive, construction and also for household use.

FEATURES:

• Paintable.
• Non-shrinkage.
• Heat resistance.
• The fast setting is within 4 minutes.
• Strong bonding strength when hardened.
• Water, solvent, acid and alkaline resistance.

USES:

• Permanent repair: Leaks, holes, cracks, mounting signs to walls.
• Suitable Substrates: Metal, fibreglass, concrete, ceramics and some plastic materials.

NOT RECOMMENDED FOR: PE, PP and PTFE.APPLICATION:

• The surface must be clean, dry, free from oil and grease and thoroughly roughened.
• Remove caps, and pierce the end of tubes. Squeeze an equal amount of resin and hardener from each tube. Ratio 1:1.
• Mix thoroughly until homogenous.
• Apply to the surfaces to be repaired or joined together.
• Clean off the excess mixture with a solvent.

SPECIFICATION:

• Colour - Resin - Colourless
• Hardener - Colourless
• Specific gravity - Resin - 1.19±0.05 g/ml
• Hardener - 1.10±0.05 g/ml
• Viscosity - Resin - 13K cps
• Hardener  - 11K cps
• Mixing ratio A:B - 1:1
• Appearance: Liquid form
• Work-Life (Minutes at 25°C) - 3 - 4
• Curing time (Minutes at 25°C) - 4 - 5
• Hardness (Shore D) - Minimum 70
• Temperature limits - 15°C to 100°C
• Nonvolatile Content - 100%
• Lap Shear Strength (kg/cm²) - Minimum 50

Features & Benefits

• Shipping Weight: 0.08Kg