Dogwalk Intermediate Dog Door - Glass Fitting Clear | Small-Medium

  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getAggregateRating, 0ms
  • reviews, product
  • bvseo-msg: EXECUTION_TIMEOUT is set to 0 ms; JavaScript-only Display.;
Dogwalk Intermediate Dog Door - Glass Fitting Clear | Small-Medium, , hi-res Dogwalk Intermediate Dog Door - Glass Fitting Clear | Small-Medium, , hi-res Dogwalk Intermediate Dog Door - Glass Fitting Clear | Small-Medium, , hi-res Dogwalk Intermediate Dog Door - Glass Fitting Clear | Small-Medium, , hi-res Dogwalk Intermediate Dog Door - Glass Fitting Clear | Small-Medium, , hi-res
$ 119 99

not available for this product

Product details

Item No: 09421006253428

Please note that this product is sold and shipped by one of our trusted Marketplace Sellers. This product is not available in any of our physical stores.

The Dogwalk(R) G-IDDC is a glass fitting intermediate dog door in clear, manufactured from 100% UV-stabilised high-impact polycarbonate - same material as aircraft windows. Its dual glaze frame accommodates glass from 4mm to 32mm thick, making it suitable for both single and double glazing. The intermediate size suits small to medium dogs - bridging the gap between the maxi cat/pet door and the full-size standard dog door. For slim line single glazing, see the G-IDDSLC. 3-year manufacturer's warranty. Designed in New Zealand by Pet-Tek International since 1999.

Key Features
  • Clear dual glaze frame - suits single and double glazing up to 32mm
  • Intermediate size - 216x250mm flap for small to medium dogs
  • Round 320mm cut-out - glazier drills a single hole
  • No external screws - clean, seamless appearance
  • Full brush seals on all four sides - draught-free and weatherproof
  • 4-way locking dial with additional security pin
  • 100% UV-stabilised high-impact polycarbonate - same material as aircraft windows
  • 3-year manufacturer's warranty
  • Designed in New Zealand by Pet-Tek International since 1999
Installation

Glass fitting doors must be installed by a qualified glazier - a hole is cut in the glass and the door clamps over it. DIY installation is not recommended. Important: the hole must be cut before the glass is toughened. An existing toughened or double-glazed pane cannot be drilled and would need to be replaced with a pre-cut panel.

Specifications
  • Flap size: 216mm x 250mm
  • Overall size: 370mm x 370mm
  • Cut-out size: 320mm dia (round)
  • Application: 4mm - 32mm
  • Pet size: Small - Medium Dogs
  • Colour: Clear
  • Product code: G-IDDC
  • Replacement flap code: G-IDDRF

Genuine Dogwalk(R) part by Pet-Tek International - designed and made in New Zealand since 1999. 3-year manufacturer's warranty.