Sold by Trade Depot

Smart Meter for Venus-E - CT002

  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getAggregateRating, 0ms
  • reviews, product
  • bvseo-msg: EXECUTION_TIMEOUT is set to 0 ms; JavaScript-only Display.;
Smart Meter for Venus-E - CT002, , hi-res Smart Meter for Venus-E - CT002, , hi-res Smart Meter for Venus-E - CT002, , hi-res Smart Meter for Venus-E - CT002, , hi-res
$ 99 00

not available for this product

Product details

Please note that this product is sold and shipped by one of our trusted Marketplace Sellers. This product is not available in any of our physical stores.

MARSTEK Smart CT Meter 002
The Marstek Smart CT Meter 002 tells your Venus E 3.0 what is happening in your home. Installed at your switchboard, it measures the electricity flowing through your main supply and sends that data to the battery in real time. The battery uses it to decide when to charge from your excess solar and when to discharge to cover your household load.
It works with both single-phase and three-phase supplies, so it suits most NZ homes. For three-phase, it supports four-wire wiring with three current channels. It measures up to 100A with 1% accuracy on both current and voltage, and it runs at 50Hz or 60Hz from 100 to 265VAC while drawing under 2W itself.
Connectivity is flexible. It supports 2.4GHz Wi-Fi, Bluetooth 5.4 dual-mode, and wired RS485 and Ethernet communication. At just 36 x 90 x 67.4mm and 94.4g, it fits neatly alongside the other components in your switchboard.
Features
  • Required companion for the Marstek Venus E 3.0
  • Compatible with single-phase and three-phase supplies
  • Measures current and voltage at the switchboard in real time
  • 3 current channels for three-phase four-wire installations
  • 0 to 100A current measurement range
  • 1% measurement accuracy
  • Wi-Fi (2.4GHz), Bluetooth 5.4, RS485 and Ethernet connectivity
  • Low power draw of under 2W
  • Compact and lightweight at 94.4g

MARSTEK App - Play Store (Android) / App Store (IOS)

SPECS ITEM MARSTEK Smart CT Meter 002 MODEL TPM2-100CT POWER SUPPLY PARAMETERS AC Voltage 100 ~ 265VAC DC Voltage / FUNCTION Current Measurement Range 0 ~ 100A Voltage Measurement Range 100 ~ 265VAC Current Measurement Accuracy 1.00% Voltage Measurement Accuracy 1.00% Apparent Power 1.00% CONNECTIVITY Wi-Fi 2.4GHz: n20 Bluetooth Version BT 5.4 Dual-Mode Modulation Mode GFSK Communication Ports
  • RS485
  • Wi-Fi
  • Ethernet
BASIC PARAMETERS Operating Temperature 0°C ~ 40°C Device Power Consumption <2W Wiring Type Three-Phase Four-Wire Current Channel 3 Channels Operating Frequency 50Hz / 60Hz Dimensions 36mm x 90mm x 67.4mm Weight 94.4g
Important Installation Note:

Please note that this is not a DIY product. For safety, compliance, and optimal performance, all solar panels, inverters, batteries, and EV chargers must be installed by a certified/approved installer.

All systems require design by a qualified solar professional to ensure maximum efficiency and energy optimisation.

However, specified outputs reflect optimal conditions, but actual performance will vary depending on site-specific factors including installation environment, orientation, shading, and weather.

If you are purchasing an installation from Trade Depot, see our full installation T&C's.

Features & Benefits

  • Shipping Weight: 0.1Kg