Sold by NICSONS PET MALL

Dogwalk Dog Door - Glass Fitting White | Medium-Large Dogs

  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getAggregateRating, 0ms
  • reviews, product
  • bvseo-msg: EXECUTION_TIMEOUT is set to 0 ms; JavaScript-only Display.;
Dogwalk Dog Door - Glass Fitting White | Medium-Large Dogs, , hi-res Dogwalk Dog Door - Glass Fitting White | Medium-Large Dogs, , hi-res Dogwalk Dog Door - Glass Fitting White | Medium-Large Dogs, , hi-res Dogwalk Dog Door - Glass Fitting White | Medium-Large Dogs, , hi-res Dogwalk Dog Door - Glass Fitting White | Medium-Large Dogs, , hi-res
$ 139 99

not available for this product

Product details

Please note that this product is sold and shipped by one of our trusted Marketplace Sellers. This product is not available in any of our physical stores.

The Dogwalk(R) G-DDW is a glass fitting dog door in white, manufactured from 100% UV-stabilised high-impact polycarbonate - same material as aircraft windows. Its dual glaze frame accommodates glass from 3mm to 32mm thick, making it suitable for both single and double glazing. The white frame suits white-framed aluminium windows, white sliding door frames and uPVC joinery. The flap is designed to swing higher to reduce stress on the hinge and minimise broken flaps. For slim line single glazing, see the G-DDSLW. 3-year manufacturer's warranty. Designed in New Zealand by Pet-Tek International since 1999.

Key Features
  • - White dual glaze frame - suits white aluminium and uPVC joinery
  • - Suits single and double glazing up to 32mm thick
  • - Large round 385mm cut-out - glazier drills a single hole
  • - Flap swings higher to reduce stress on hinge - fewer broken flaps
  • - No external screws - clean, seamless appearance
  • - Full brush seals on all four sides - draught-free and weatherproof
  • - 4-way locking dial with additional security pin
  • - 100% UV-stabilised high-impact polycarbonate - same material as aircraft windows
  • - 3-year manufacturer's warranty
  • - Designed in New Zealand by Pet-Tek International since 1999
Installation

Glass fitting doors must be installed by a qualified glazier - a hole is cut in the glass and the door clamps over it. DIY installation is not recommended. Important: the hole must be cut before the glass is toughened. An existing toughened or double-glazed pane cannot be drilled and would need to be replaced with a pre-cut panel.

Specifications
  • Flap size: 270mm x 313mm
  • Overall size: 415mm (W) x 430mm (H)
  • Cut-out size: 385mm dia (round)
  • Application: 3mm - 32mm
  • Pet size: Medium - Large Dogs
  • Colour: White
  • Product code: G-DDW
  • Replacement flap code: G-DDRF

Genuine Dogwalk(R) part by Pet-Tek International - designed and made in New Zealand since 1999. 3-year manufacturer's warranty.